2
Please wear safety glasses, helmet and other necessary personal protective equipment
when operating hydraulic equipment
WARNING
EAGLE PRO EL and ELL series Lock Nut cylinders are not equipped with a stop ring to
retain the Piston rod. To prevent piston rod over-extension, a port is provided to vent the
oil out of the cylinder as the piston rod reaches the maximum stroke. When the YELLOW
LINE around the piston rod becomes visible, the piston rod will reach to the maximum
stroke, please stop lifting Once the RED LINE becomes visible, the piston rod has
reached the maximum extension; further extension could damage the seals or result in
the piston rod being forced out of the cylinder (See Figure 1).
NEVER remove the plug or substitute a conventional pipe plug from the piston rod travel
restriction port (See Figure 1).
Tilt saddle (if available) MUST NOT exceed the maximum tilt angle of 5 ° (See Figure 1).
Use cylinder to lift load should have solid lifting surface for correct support. Please select
steel or wood those are capable of supporting the load.
Please install pressure gauge in the system to monitor the operating pressure. The gauge
must have same pressure rating as the pump and cylinder in the system. The wrong
gauge may cause equipment failure and possible personal injury.
Please carefully inspect the cylinder and coupler before use cylinder or shift coupler.
NEVER connect the cylinder with damaged coupler or damaged port threads. The
damaged coupler or damaged port thread may cause equipment failure and possible
.
EAGLE PRO INDUSTRIES, INC.
Form No. E01104
Rev. A Date: 06.10.2009
