United Vision Solutions, C10 Center St., Suite 401-402 +1-413-591-8477
Chicopee, MA 01013 USA
6. Camera Control Unit
The EV3000-P-EMCCD Camera Control Unit CCU has many smart function
which make it easly to configure camera remotly through keyboard.
a- Zoom directions
To change Zoom Wide-Tele direction from keyboard send command
“ goto
preset 118” command
Every time this command is sent to EV3000-P-CCD,Zoomming direction will
be toggled
.
GOTO PRESET No.
FUNCTION
GOTO PRESET 118
ZOOM WIDE/TELE Direction change
b- Semi Auto Focus
Setup Semi Auto-focus as follows :
⑪
Zoom-wide end
⑩
⑨
⑧
⑦
⑥
⑤
④
③
②
①
Zoom-tele end
NOTE : Point
①
is zoom tele end and Point
⑪
is zoom wide end position of zoom lens.
Step-1) Move zoom position to Zoom tele end point(
①
) by zooming tele.
Adjust focus by focusing near/far at this point.
Send “ set preset 86” command.
Step-2) Move zoom position to point(
②
) by zooming wide and adjust focus
by focusing near/far at this point.
Send “ set preset 87” command.
Step-3) Move zoom position to point(
③
) by zooming wide and adjust focus
by focusing near/far at this point.
Send “ set preset 88” command.
Step-4) Move zoom position to point(
④
) by zooming wide and adjust focus
by focusing near/far at this point.
Send “ set preset 89” command.
Step-5) Move zoom position to point(
⑤
) by zooming wide and adjust focus
by focusing near/far at this point. Send “ set preset 90” command.
Step-6) Move zoom position to point(
⑥
) by zooming wide and adjust focus
by focusing near/far at this point. Send “ set preset 91” command.
Step-7) Move zoom position to point(
⑦
) by zooming wide and adjust focus
by focusing near/far at this point. Send “ set preset 92” command.
