31
This menu lets you go to the waypoint
selection menu, delete a waypoint from
the route, or see details about any way-
point in the route. Since we want to add
a waypoint to the route, press the right
arrow key on the “Insert From WPTS”
label. The screen shown below appears.
Select Waypoints
Select the first waypoint either by using
the waypoint name or waypoint number
menus. As you move through the list of
saved waypoints, their date and time
saved, position, and distance and bear-
ing from your present position show at
the bottom of the screen. When the de-
sired waypoint appears that you want to
use as the first waypoint on the route,
move the black box to the “Add WPT To
Route” label, then press the right arrow
key. The unit returns to the route plan-
ning screen with this waypoint placed in
the first location on the list as shown at
right.
To add more waypoints to the route, sim-
ply press the down arrow key to the next
position on the list and press the right
arrow key. Continue until all of the way-
points have been added to the route.
As you add waypoints to the list, their
bearing and distance from each other is
shown to the right of the waypoint name.
On the screen at right, waypoint 6 is on
a bearing of 215° and 7.27 miles from
waypoint 3. The total route distance is
shown at the bottom of this screen.
