44
box. Now press the right arrow key. The screen
shown at right appears.
If you simply press the right arrow key, turning
the simulator on, the Eagle Explorer will start from
your present position and follow a track of 355° at
100 miles per hour.
To change either the track or speed, highlight the
one you want to change, then press the right or
left arrow key. When the numbers are correct,
press the EXIT key.
Starting Position
Normally, the starting position for the simulator is
your present position. If you want to change the
starting position, highlight the “Set Starting Way-
point” label on the Simulator Setup menu, then
press the right arrow key. The screen shown at
right appears.
You can select any waypoint as the simulator’s
starting point. Select the starting point by press-
ing the right arrow key on the “WPT#” label until
the desired starting waypoint number appears.
Now highlight the “Start At” label and press the
right arrow key. The Eagle Explorer returns to the
Simulator Setup menu using the waypoint you specified as the starting
waypoint.
Use Arrow Keys to Steer
This option lets you change both the course and
speed on the screen as the simulator is running.
To do this, highlight the “Steer With Arrows” label
on the Simulator Setup screen, then press the
right arrow key. The screen shown at right ap-
pears. Use the up and down arrow keys to in-
crease or decrease the speed. Use the right and
left arrow keys to change the track. Press the
EXIT key to erase these menus.
When you’re finished changing the track and
speed, press the EXIT key to erase the menus.
