TECHNICAL DATA
Voltage:1.5V AA/LR6
Power: 0.06W/LED
INSTALLATION OF BATTERIES
Lamps
Use 3 x AA (batteries not supplied)
Open the back of the light with a coin, turn the cover
anti-clockwise to open it
Insert 3 x AA batteries, take note to the polarities
indicated
Replace cover, ensuring the 2 pins slot into the 3 holes
on the back of the lamp. Turn cover clockwise, and
secure with a coin
NB: If the batteries need to be replaced after mounting
the lamp, turn the lamp anti-clockwise to open it.
Remote
Use
3
x
A
AA (batteries not supplied)
Slide the battery cover down to open the battery
compartment
Insert 2 x AA batteries, take note to the polarities
indicated
Replace cover, closing the battery compartment
OPERATION
Once batteries are fitted, the lamp and remote
control are ready to use. The lamp can be
switched on by the remore control by pressing
the ON button. The lamp can also be switched
on by pressing the centre of the device.
To turn off the lamp via the remote control,
simply press the OFF button. Likewise, pressing
the centre of the lamp will switch it off.
To dim the lamp, press the LOW button once.
If you require the lamp on for a short period
of time, press the 30 MIN button, and this will
automatically switch the lamps off after 30 minutes.
