3 |
P a g e
HOW TO USE
Wiring
Connect the transmission wires as shown in the wiring diagram below. Ensure the wires connect
corresponding terminals.
Battery Installation
1.
Open the battery cover on the master station
2.
Insert 4x ‘C’ batteries into the battery compartment
3.
Close the battery cover
Operation
Call from Master Station
1.
Slide the function switch to ON
2.
Press CALL/TALK on the master station to make a call
3.
Hold CALL/TALK to talk, release to listen
4.
Slide the function button to OFF when finished, to put the unit in standby mode
Call from Slave Station
1.
Press CALL on the slave station to make a call
2.
Talk into the device, you do not need to press any buttons
MAINTENANCE
Before cleaning, turn the appliance off, and disconnect from the power supply. The appliance may
then be cleaned using a damp cloth with a drop of washing-up liquid to remove any dust or dirt from
the case. Do no use stronger detergents or solvents as these may damage the finish. Using a dry 1"
(25mm) paint-brush, remove any dust from the grilles.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste. Most local authorities have
specific collection system for appliances and disposal is free of charge to the end-user. When
replacing an existing appliance with a similar new appliance your retailer may take the old appliance
for disposal.
