Unpacking and Setting Up
The following directions specify the correct steps that should be taken once you
receive delivery of your TT series tow tractor. These steps will ensure that the tow
tractor will operate safely.
1. Read this entire manual, paying close attention to the safety requirements laid out
in it.
2. During the unloading of your Tractor, you should have noted any shipping damage
and reported it to Eagle Tugs and the shipping company. Verify that all components
appear to be in order and undamaged.
3. Remove any documentation (including this manual) from where it is secured to the
seat. Dispose of the zip ties.
4. Verify correct tire pressure on all tires
5. Fuel the tractor with the correct fuel as specified in section 4-2 of this manual.
6. Your Tow Tractor (if equipped) was shipped with two (TT4-8) or four (TT10-12) re-
movable tie-down rings, If necessary, these rings can be removed using the follow-
ing directions. Note: you will lose the ability to transport the tractor by removing the
tie-down rings.
•
TT4 thru TT8 tractors; The rings can be removed by removing the four bolts/
nuts that secure the hitch and tie-down ring bracket in place. The hitch then
needs to be re-secured using the same bolts and torqued to a value of
85/115 ft-lbs/Nm.
•
TT10 thru TT12 tractors; The rings can be removed by removing the four
bolts/nuts that secure the tie-down bracket in place. The hardware does not
need to be reinstalled.
TT10-12 Tie-Down
Ring Location
TT4-8 Tie-Down
Ring Location
Putting the Tow Tractor Into Service
4-1
Summary of Contents for TT4
Page 1: ...OPERATIONS MANUAL VEHICLE TYPES ALL TT MODELS EAGLE TUGS...
Page 2: ......
