2. ASSEMBLY
Caution
• While adjusting the collar, please take extra care to avoid
injury.
• Set the each part to the correct position.
Assembly steps:
Drum stand assembly
1. Take out the drum stand and loosen the screws of the
collars.
2. Set the three master tube at 1200 angle.
3. Screw down at the collars.
4. Loosen the screws at the collars.
5. Set the L/R cymbal tubes to the proper height.
6. Screw down to fix the cymbal tubes.
7. Loosen the screws at the collars.
8. Adjust the cymbal collars to proper height.
9. Screw down to fix the cymbal tubes.
10. Loosen the screws at the collars.
11. Adjust the hi-hat collars to proper height.
12. Screw down to fix the hi-hat tubes.
13. Loosen the butterfly nuts.
14. Adjust the cymbal rod to proper height and angle.
15. Tighten the butterfly nuts.
16. Loosen the screws at the collars.
17. Adjust the U stand of snare to proper position.
18. Screw down.
19. Loosen the screws at the collars.
EAGLETONE E-TOUCH ELECTRONIC DRUMS
User’s manual english
6
U
CONNECTORS / GETTING READY TO PLAY THE DRUMS
