(
)
As picture1
(
)
As picture2
(
)
As picture3
(
)
As picture4
(
)
As picture5
(
)
As picture6
Instructions For Cleaning The Steam Generator
Warning:
1. Do not Use the
cleaning function while
any other function is on.
2. Do not Use an Alkaline
Cleaning agent to clean
steam generator.
3. Do not Use any powder
cleaning agent to clean
steam generator, Doing
so may plug system.
We Recommend that you
use Citric Acid or Vinegar
to clean steam generator!
Procedure: Turn off power to the shower, Then open the cap on the Cleaning port on the wall of the shower.
Put approx ½ cup of Vinegar in the cleaning port and put the cap back on the cleaning port and let vinegar sit
for 10-15min in steamer. Turn the shower on and start the steam function for 5min. Turn off Steamer and sediment
in steamer flushes out when steamer drains automatically.
For Safety, DO NOT OPEN cap on cleaning port when steamer is in operation to reduce risk of scalding from steam.
Please shut down all functions before using steam generator cleaning function (As pic 1)
After making sure all functions are turned off. Remove the cap from the Cleaning port on wall (As pic 2)
Remove the lid by turning in a counter clockwise direction and remove carefully.
After adding the cleaning agent to the steamer, replace the cap on the port and turn it in a clockwise direction
to tighten. (As Pic 4)
After replacing the cap, Press to turn on the steam generator function and the system will begin to clean
the steam generator automatically. (As Pic 5)
After 5-10 Minutes, press the button to turn off the steam generator.
Then press the the waste water and sediment will automatically drain from steamer (As Pic 6)
Pour approx ½ cup of vinegar or liquid citric acid into the cleaning port. Use only Liquid cleaning agents
Do not use solid cleaning agents or any other Acid, or Alkaline compounds. Pour into cleaning port
(As pic 3)
Summary of Contents for DZ972-1F8
Page 1: ......
Page 3: ......
Page 21: ...Model Number Purchase Location Purchase Date Purchase Date Model Number...