Figure 1:
325LA Specification:
Frequency Coverage:
250 kHz to 150 MHz
Gain:
50 dB
Gain Variation:
±1.5 dB
Maximum Class A Linear Output:
25W
Harmonic Distortion:
All harmonics more than 23 dB below
main signal at 20W output; lower at
reduced power output.
Drive Source Requirements
Any signal generator, function
generator, or oscillator capable of 1
mW of output into 50
Ω
Input/Output Impedance:
Input VSWR:
Output VSWR:
50
Ω
1.5:1 Maximum
2.5:1 Maximum
Power Requirements:
115VAC ±10%, 50-60Hz, 3.5A;
230VAC ±10%, 50-60Hz, 1.7A
Power Output Display:
Forward and Reverse power in Watts;
with an accuracy of 5%.
Noise Figure:
10 dB Maximum
Typical 3rd Order Intercept Point:
+53dBm
Stability:
Continuous operation into any load or
source impedance.
Protection:
Unit will withstand a +13dBm input
signal (IV RMS) for all output load
conditions, including short and open
circuit loads.
Front Panel Controls:
AC Power On/Off
Front Panel Display:
LCD backlit display
Front Panel Connections:
RF Input RF Output
Operating Temperature:
0° to 45° C
Cooling System
Forced air
Size:
7.5" H x 9.5" W x 12.5" D
19.05 x 23.13 x 31.75 cm.
Weight:
25 ibs; 11.3kg.
Input Connector:
Type BNC
Output Connector:
Type BNC
Rack Mounting:
19 inch adaptors optional
