3J01-INS-LAB-RevB13 • Traveler HTC User Manual
13
5 ASSEMBLY
UNPACKING
1. Check for any obvious damage to the carton or its contents.
If damage is evident, notify the carrier or your Graham-Field
authorized distributor.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
Info: Unless the Traveler HTC is to be used immediately, retain
boxes, containers and packing material for use in storing until
use of Traveler HTC is required.
Inspection
1. Examine the wheelchair for nicks, dents, scratches or other
damage.
2. Inspect all components.
Storage
1. Store the repackaged wheelchair in a dry area.
2. Do not place other objects on top of the repackaged wheelchair.
ASSEMBLY
Specific tools needed to perform each assembly step are identified
in assembly directions. A complete list of tools needed to perform all
operations in this section follows:
M13 wrench
M10 wrench
M5 hex key
M4 hex key
Unfold Traveler HTC
Unfold the Traveler HTC by pushing down with even pressure on the top
of the seat upholstery on both sides.
WARNING: Do not place your hands between seat rail and side
panel.
