MODEM INFO (now only support X5 X7 IQ200)
If ACU console port connect to modem console port correctly.Console BaudRate setting.
Console Port Setting
iDirect IQ200
115200
iDirect X5 X7
9600
After console is connected, ACU can read all modem real-time status directly ,like modem S/N,
RX_SNR, Status.
S/N
,Modem serial number of the MODEM.
SNR
, RX SNR.
SNR < 4 , means weak signal, can not setup stable link
SNR>6, means signal is ok, can setup stable link
SNR>10, means good signal.
Status
:the current state of MODEM,
IN_NETWORK
works on behalf of MODEM and can access the Internet.
IN_ACQUISITION
represents the acquisition network, which is the link-up process, the antenna is aligned,
and Rx and Tx are ok.
WAITING_FOR_ACQUISITION
the antenna is aligned, Rx is OK, and Tx is ready to start establishing a link.
DETECTED
stands for Rx ok.
WAITING_FOR_RX_LOCK
the antenna Rx has not locked the star successfully, MODEM is waiting for the antenna
to be aligned with the satellite.
WRONG_NETWORK
on behalf of MODEM does not have authorized access to the primary station. Plz call for
NOC with help.
RECOVERY_STACK
on behalf of MODEM can not access the Internet. Plz call for NOC with help.
Appendix 2
Sub-page MODEM info page
46
www.eardatek.com
ACU side,press UP button to display
all MODEM status information.
