Maintenance
Always allow the heat gun to cool
down and disconnect from power
supply after use. The heat gun
should be cleaned before being
stored away by wiping over with a
clean damp cloth.
DO NOT USE
ANY CHEMICALS.
Ensure that the
ventilation slots are not blocked.
Trouble Shooting
If a problem occurs always
switch the unit off immediately.
My unit fails to work?
Check the fuse in the plug is sound
and rated 13 amps. If an extension
cable is used it must be fully
unwound and rated at least 10
amps capacity.
6
MAINS CONNECTION
Your unit may have been supplied with a mains lead with a fitted,
moulded plug. This is identified by the fuse holder in the base of the
plug. Please read the following safety instructions before use.
1.
If the moulded plug is cut off from the mains lead then the
plug must be disposed of safely.
2.
NEVER under any circumstances insert such a plug into a
13 amp socket.
3.
NEVER under any circumstances use the appliance without
the fuse cover fitted. This is the little cover fixed into the
base of the plug to hold the fuse in place.
4.
If you lose the fuse cover then please contact our helpline
on 01483 454666.
5.
A replacement fuse must be rated at 13amp. The fuse must
be manufactured and approved to BS1362.
6.
IF IN ANY DOUBT, PLEASE CONTACT AN ELECTRICIAN.
