Earlex HV4500, Operating Manual

US

6

HV4500

5. Field of application

Many different coating substances can be processed with this tool. 

6. Coating Materials Suitable for Use

Interior wall paint (dispersions and latex paint) 

Water and solvent-based paints, finishes, primers, clear finishes, staining sealers and 

wood sealer preservatives. 

7. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and  

acidic coating substances. Flammable materials.

8. Preparation of the workplace (for interior wall paint)

Socket-outlets and plugs must be masked. Risk of an electric shock as a 

consequence of sprayed material entering the socket-outlet!  

Mask all the areas and objects that are not to be spray painted, or 

remove them from the work area. No liability is assumed for damage 

due to over spray.
Silicate paint corrodes glass and ceramic surfaces upon contact! All 

such surfaces must therefore be completely covered.

i

Pay attention to the quality of the adhesive tape used. 

Do not use excessively strong adhesive tape on wallpaper and painted 

surfaces, in order to avoid damaging these surfaces when removing the 

tape. Remove adhesive tape slowly and evenly; do not use jerky movements. 

Do not leave adhesive tape on surfaces any longer than necessary, in order 

to minimise the possibility of residues when removing. 

Also observe the adhesive tape manufacturer's instructions.