background image

US

11

HV4500

18. Spare Parts

Spare Parts

Designation

Reference

Order No.

Air Cap, Ring and Spray Direction Plate  Fig. 9, 1+2+3

EAR2354075

Fluid Tip

Fig. 9, 4

EAR2354076

Fluid Tip Seal

Fig. 9, 5

EAR2354077

Needle Spring

Fig. 10, 2

EAR2353978

Material Volume Adjuster

Fig. 10, 1

EAR2353999

Air Feed Tube

Fig. 9, 9

EAR2353984

Gland Washer (Pack of 3)

Fig. 10, 4 (Visible when 

needle is removed)

EAR2354010

Paint Container Seal

Fig. 9, 7

EAR2353989

Filter

Fig. 12 A

EAR2353961

Air Hose

Fig. 1, 4

EAR2353907

19. Accessories

Further information about the EARLEX range of products for renovating, is available 

on www.earlex.com.

Accessories

Designation

Order No.

Paint Container

EAR2353992

20. Environmental protection

The tool and all accessories and packaging have to be recycled in 

an environmentally friendly manner. Do not dispose of the tool with 

household waste. Support environmental protection by taking the tool 

to a local collection point or obtain information from a specialist retailer.

Leftover paint and solvents may not be emptied into drains, the sewage system 

or disposed of as household rubbish. It has to be disposed of separately as special 

waste. Please pay special attention to the instructions on the product packaging.

Summary of Contents for HV4500























Reviews: