background image

US

4

HV4500

4. Power tool use and care 

a) Do not overload the tool. Use the power tool designed for the work that you 

are doing. 

You work better and safer in the specified performance range if you use 

the suitable power tool.

 

b) Do not use power tools whose switch is defective. 

A power tool that cannot be 

switched on or off is dangerous and has to be repaired.

 

c)  Remove the plug from the power source before carrying out tool settings, 

changing accessories or putting the tool away. 

This precautionary measure 

prevents unintentional starting of the tool. 

d) Store unused power tools so that they are inaccessible to children. Do not 

let persons use the tool who are not familiar with it or who have not read 

these instructions. 

Power tools are dangerous when they are used by inexperienced 

persons.

 

e) Take proper care of your tools. Check whether the moving parts function 

trouble-free and do not jam, whether parts are broken or damaged so that 

the tool function is impaired. Have damaged parts repaired before using 

the tool. 

Many accidents have their origin in power tools that have been maintained 

badly.

 

f) Use the power tool, accessories, insert tools, etc. in accordance with these 

instructions and in a fashion specified for this special tool type. Take the 

working conditions and the activity to be carried out into consideration. 

The 

use of power tools for purposes other than the intended ones can lead to dangerous 

situations.

 

5. Service 

a) Have your tool repaired only by qualified specialist personnel and only with 

original spare parts. 

This ensures that the tool safety is maintained.

 

b) If the supply cord is damaged, it must be replaced by the manufacturer or its 

service agent or a similarly qualified person in order to avoid a safety hazard.

3. Safety Instructions for Spray Guns 

CAUTION! Wear breathing equipment: Paint mist and solvent vapours are damaging 

to health. Always wear breathing equipment and only work in well ventilated rooms or 

using supplementary ventilating equipment. It is advisable to wear working clothing, 

safety glasses, ear protection and gloves.  

CAUTION:  DANGER OF INJURY! Never point the spray stream towards 

human beings or animals. 

Summary of Contents for HV4500























Reviews: