background image

EN

11

HV1900

18. Spare Parts

Spare Parts

Designation

Reference

Order No.

Air Cap + Ring + Spray Direction Lever Fig 9, 1,+2+3

EAR2353941

Suction Tube

Fig 2,A/B

EAR2353955

Paint Container Seal (Pack of 3)

Fig 9, 7

EAR2353969

Needle and Fluid Tip Tool

Fig 1, 5

EAR2353938

Viscosity Cup

Fig 1, 6

EAR2353937

Filter (Pack of 5)

Fig 12, A

EAR2353939

19. Accessories

Further information about the EARLEX range of products for renovating, is available 

on www.earlex.com.

Accessories

Designation

Order No.

1.0mm Fluid Tip / Needle & Seal

EAR2353935

1.5mm Fluid Tip / Needle & Seal

EAR2353925

2.0mm Fluid Tip / Needle & Seal

EAR2353952

2.5mm Fluid Tip / Needle & Seal

EAR2353987

3.0mm Fluid Tip / Needle & Seal

EAR2353956

1l Pot / Lid 

EAR2354031

20. Environmental protection

The tool and all accessories and packaging have to be recycled in 

an environmentally friendly manner. Do not dispose of the tool with 

household waste. Support environmental protection by taking the tool 

to a local collection point or obtain information from a specialist retailer. 

Leftover paint and solvents may not be emptied into drains, the sewage system 

or disposed of as household rubbish. It has to be disposed of separately as special 

waste. Please pay special attention to the instructions on the product packaging.

Summary of Contents for SPRAY SYSTEM HV 1900























Reviews: