HDCam
Installation Manual
EN.PM.UM11 2017022424 Earth Networks Part # 9710 Page 8 of 35
Installation must conform to national, state, and local building code requirements with the
most stringent guidelines being adhered to.
The HDCam should only be installed by someone comfortable with being on a high
ladder or rooftop and who is authorized by the site to perform the installation. Roof and
ladder safety is crucial!
Allow only qualified Electricians to make electrical connections. Take all reasonable
safety precautions – double checking a power cable connection could save a life.
Stay as far away from other electrical wiring as possible.
Never allow the camera
housing, the cabling, a drill bit, or any other item to contact electrical wires or
conduit. Injury or death could result.
A qualified installer will need to securely mount the unit to a supporting structure capable
of sustaining the weight of the unit (4.5 pounds) by using appropriate tools and hardware.
Failure to properly secure the HDCam could result in the unit separating from the support
structure and falling. This would not only damage the camera but could injure anyone
standing nearby.
If needed, Earth Networks may be able to recommend professional installers and an
estimate of the cost. If this is desired, please call Earth Networks Weather Station
Technical Support at (800)624-4205 or email support@earthnetworks.com.