SCW-410-QS (05/12)
Page 14
General guidelines for introducing propylene glycol into the water circulating system follow. The
manufacturer’s specific instructions and industry standards always take precedence when
introducing propylene-glycol to the system.
•
Calculate the quantity of inhibited propylene-glycol (fluid) required to achieve the
desired results.
•
Introduce a sufficient quantity of water to the system and pressure check to ensure
a sealed system.
•
Drain some water from the system to provide enough volume for the calculated
amount of fluid.
•
Add the correct amount of fluid and any water needed to completely refill the
system, allowing for liquid expansion due to operating temperature.
•
Circulate the inhibited propylene-glycol antifreeze solution for at least 24 hours to
ensure complete mixing. Check the liquid concentration to assure that the correct
mixture is obtained.
Electrical and Sound Data
Compressor
Model
Voltage/Phase/Hz
Voltage
LRA
RLA
MCA
MFS
Sound Pressure Level *
@10 ft, dB(A)
Min.
Max.
-024-1C
230-1-60
207
253
64.0
14.3
18.0
30
57.0
-024-2C
230-3-60
207
253
58.0
9.3
11.0
20
60.0
-036-1C
230-1-60
207
253
112.0
20.0
25.0
40
59.0
-036-2C
230-3-60
207
253
88.0
15.1
19.0
30
62.0
-048-1C
230-1-60
207
253
134.0
27.9
34.0
50
59.0
-048-2C
230-3-60
207
253
110.0
17.7
22.0
35
62.0
-060/-068-1C
230-1-60
207
253
178.0
28.3
34.8
50
63.0
-060/-068-2C
230-3-60
207
253
136.0
19.2
23.9
40
64.0
LRA = Locked Rotor Amps
MFS = Maximum Fuse or HACR Circuit Breaker Size
RLA = Rated Load Amps
(External)
MCA = Minimum Circuit Ampacity
AWG = Consult NEC and Local Codes
*Data Source is published Copeland Compressor Sound Power Levels converted to Sound Pressure Level in
dB(A) at 10 Feet, having two reflective surfaces. Effects of ETI compressor unit cabinet and components not
included.
Figure 9. Compressor Unit Electrical and Sound Data
Summary of Contents for SCW R-410A
