background image

Operator's Manual

CRT Models 5040 and 6040E

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5 CST

3

intRoduCtion

thAnk You . . .

for  purchasing  an  Earthquake®  counter  rotating  rear-tine  rototiller  from  Ardisam,  Inc.,  and  congratulations  on 

your investment in quality.  We have worked to ensure that this rear-tine rototiller meets the highest standards 

for usability and durability. With proper care, your rototiller will provide many years of service. Please take the 

time  to  read  this  manual  carefully  to  learn  how  to  correctly  operate  and  maintain  your  rototiller. This  manual 

should be considered a permanent part of your rototiller. Due to continuous efforts to perfect our product, certain 

procedures and specifications are subject to change without notice. 

ContEntS

Registration & Warranty ..............................................................................................2
Safety .............................................................................................................................3-6
Unpacking & Assembly ...............................................................................................7
Features ............................................................................................................................8
Operation ...................................................................................................................9-14
Maintenance ..........................................................................................................15-18
Troubleshooting ...................................................................................................19-20
Parts ...........................................................................................................................21-27

This Instruction Book may contain information for more than one model. Read and keep this book for future 

reference.  This book contains important information on  SAFETY, ASSEMBLY, OPERATION, AND MAINTE-

NANCE.  The owner must be certain that all the product information is included with the unit. This informa-

tion includes the INSTRUCTION BOOKS, the REPLACEMENT PARTS and the WARRANTIES. This information 

must be included to make sure state laws and other laws are followed.

Earthquake reserves the right to change, alter or improve the product and this document at any time with-

out prior notice.  Because of continual product development, your product may differ slightly from that 

illustrated in the manual.

Summary of Contents for 5040





























Reviews: