Operator's Manual
Rolling String Trimmer 600050V, 600050B
Check for parts online at
www.getearthquake.com
or call 800-345-6007 M-F 8-5
7
ASSEmbLY
tools Required:
1 Knife to cut carton
1 T-handle Wrench
1 Wrench to assemble tires
waRning
ALWAYS WEAR SAfEtY gLASSES oR EYE
ShiELdS WhiLE ASSEmbLing thE tRimmER.
waRning
bEfoRE doing AnY ASSEmbLY oR mAintE-
nAnCE to thE tRimmER, REmoVE thE WiRE
fRom thE SPARk PLug.
Figure 1-Your new trimmer as it is shipped to you
The image in Figure 1 above shows the trimmer as it is
positioned and assembled for shipment.
to Attach the tires
Attach the tires by inserting the spacer, the washer and
the wheel. Secure and tighten by using the axle nuts
provided
Figure 2: Assembling tires
to Remove the trimmer from the Carton
1. Remove any of the loose parts in packaging, including
the parts bag, from the carton.
. Remove the packing material positioned around the
unit.
3 Cut down all four corners of the carton and lay the
side panels flat.
4. Pull the trimmer out of the carton.
5 Remove packing material from around the trimmer
head.
6. Remove protective plastic from front of frame.
7. Remove protective material from wheel axle.
ContEntS of PARtS bAg
1 - Owner’s Manual; and 1 - Parts Bag
t-handle
Wrench
Safety
glasses
two Sets of
trimmer Lines
