background image

Sweep:

 Controls the frequency peak of 

the sweep. Higher peak clockwise, lower 

peak counter clockwise. 

Rate 1,2,3:

  Changes  the  range  of  the 

speed control. Rate 1 is slow mode, Rate 

2 is LFO kill to use the Orbiter as a fixed 

resonant filter, Rate 3 is fast mode.

Rate:

 Controls the speed of the LFO. Faster 

clockwise, slower counterclockwise.

Depth:

  Controls  the  amount  of  phase 

effect mixed with dry signal. Clockwise for 

more intense phasing, counterclockwise 

for less. In “Vibrato” mode, this acts as a 

volume control.

Phase/Vibrato:

 Cuts the dry signal to 

create  a  vibe/vibrato  effect  depending  on 

the setting of the other controls. Vibrato is 

created by turning the resonance down low. 

Resonance:

 Controls the regeneration 

of  the  phased  signal.  More  resonant 

clockwise, more subtle counterclockwise.

1

2

3

4

5

6

The Grand Orbiter

 is a 4 stage OTA-based phaser with a diverse feature set that can go from 

stationary and resonant, to slow and mellow, and on through fast and swirly. It has a three-way 

toggle switch to select between the ranges of modulation: 

Rate 1

 is slow sweep mode, 

Rate 2 

kills the LFO and allows you to use the Grand Orbiter as a fixed resonant filter and 

Rate 3

 is 

fast sweep mode. The master 

Rate (3)

 control fine tunes the speed of the LFO in each of these 

modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass 

mode. The 

Depth (4)

 control blends the shifted signal in with the dry signal and controls the 

intensity of the effect. The 

Sweep (1)

 control governs the peak frequency of the phased signal’s 

tone, turned full clockwise the sweep is lively and intense; whereas turning counterclockwise 

yields a darker, more laid back peak. The 

Resonance (6)

 provides a wide range of control over 

regeneration and at higher settings adds a more pronounced and resonant tone. You can also 

use the Grand Orbiter as a true pitch vibrato with the 

Phase/Vibrato

 switch. When in Vibrato 

mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 

100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio.

<<< Controls >>>

5

4

6

1

2

3

<<< Suggested Settings >>>

Mellow Gold

Chevy vans on the beach, Major 7th Chords on 

the hi-fi tape player, incense and good vibes.

Slow n’ Easy

Creeping filter seeping sure to inspire those 

who love to explore the passageways of the 

headphone forest.

Rippling Waters

No  risk  of  electrocution  with  this  beautiful 

stream of modulations.

Warped Waylon Record

Someone left the stack of records too close to 

the coal stove...

Reviews: