Getting Started
Installing the Battery
To install the battery, follow the steps below:
1.
Slide and hold the battery latch to the unlock
position.
2.
Align and insert the battery to the battery
compartment.
3.
Push completely until the battery locks into place.
4.
Release the latch to the lock position to secure the
battery.
Charging the Battery
The Lithium-ion battery is not fully-charged upon purchase.
To charge the battery, follow the steps below:
1.
Install the battery to your notebook. See procedures above.
2.
Connect the AC adapter to the DC-in jack of your notebook.
3.
Connect the AC adapter to the power cord.
4.
Plug the power cord to an electrical outlet.
NOTE
The charging time may be longer if you are using your notebook while
charging the battery.
CAUTION
DO NOT charge the battery if the temperature is below 0ºC or higher than
50ºC.
Use only the supplied AC adapter. Using other AC adapters may damage the
battery or your notebook.
Checking the Battery Level
The Battery LED flashes red when the battery is nearly depleted.
When this happens, save your work and plug the AC adapter to charge the
battery or replace the battery with a fully charged one.
NOTE
Make sure the system has shut down before you change the battery.
18
Summary of Contents for R12-CT
Page 1: ......