18.
Tension on the flow control lever may be adjusted by
tightening or loosening the tension nut as shown.
WARRANTY
EARTHWAY guarantees this product to be free of defects
in original workmanship and materials for a period of 90-
days from sale to the original user. If any defect develops
during this period EARTHWAY will repair or replace this
product at no charge provided the defect is not the result of
mishandling or tampering and that this product is received
at the factory with shipping charges prepaid. For quicker
service you may call EARTHWAY at 800-294-0671 or 574
-848-7491, or write and describe the nature of the defect
and we will send repair parts to you. Due to the corrosive
nature of most fertilizers and ice melters, EARTHWAY
PRODUCTS, INC. makes no warranty or guarantee against
corrosion failure on models with plated steel or painted
steel frames. Clean and dry your spreader well after each
use. Warranty covers parts only, not any labor charges to
repair your spreader.
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this
spreader.
1. Obtain proper setting for material to be used from the RATE
SETTING CHART included with this spreader.
2. Move stop bolt on rate gauge assembly to the proper setting.
3. While pushing spreader forward, pull control lever back to
stop bolt.
4. To stop, push lever forward to close flow holes before you
stop moving.
5. When finished, empty any remaining material from hopper.
6. Thoroughly wash spreader and allow to dry before storing.
No oiling is necessary.
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the
manufacturer,
EARTHWAY PRODUCTS, INC.
Be sure to give the following information when ordering.
1. Model Number
2. Part Number
3. Part Description
Call (574) 848-7491, 800-294-0671 or write for current
prices.
P
LEASE
DO
NOT
RETURN
THIS
TO
THE
PLACE
OF
PURCHASE
EarthWay Products, Inc
.
1009 Maple Street
P.O. Box 547
Bristol, IN 46507
FOR YOUR RECORDS
_________________________________________
Date Purchased
_________________________________________
Store Name
PAGE 5
The settings furnished on the Rate Setting Chart are intended
as a guide only. Variations in physical characteristics of
material applied, walking speed, and roughness of ground
surface may require slightly different spreader settings. Due
to the above conditions,
EARTHWAY PRODUCTS, INC. makes no warranty as to
the uniformity of coverage actually obtained from the
settings listed.
