PAGE 2
For Support for your S15, please contact:
N
orth
A
mericA
e
urope
DMMP Limited
T: 0845 643 9776
E: info@dmmp.co.uk
W: www.earthway.co.uk
Muggioli Giardinaggio
T: 0422 96 9990
E: info@muggioligiardinaggio.com
W: www.muggioligiardinaggio.com
Earthway Products, Inc.
P.O. Box 547
1009 Maple Street
Bristol, IN 46507
T: 574-848-7491
T: 800-294-0671
E: techsupport@earthway.com
W: www.earthway.com
EuroAmerica
T: +31 (035) 5315696
E: product-management@euroamerica.nl
W: www.euroamerica.nl
5-YEAR LIMITED WARRANTY
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-years to the
end user with the original purchase receipt for
at home use
. If used for business, the warranty is 90-days. If a manufacturing non-
conformance is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product at no charge provided the
failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by Earthway.
Earthway at its discretion may require that the part(s) or product be returned along with the original purchase receipt at owners expense
for examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from
Earthway Products, Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-7491, techsupport@earthway.
com or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and describe the nature of the manufacturing defect.
SPECIFIC LIMITATIONS:
This warranty covers only the part(s) or product; any labor charges associated with repair or replacement
of non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, Earthway Products,
Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its effects.
Clean
and dry
your sprayer thoroughly after each use, as a preventative measure, coat all metal parts (inside and outside of the steel tubes) with
a light oil or silicon spray.
4
3
2
1
CAP in ready to
install position
CAP in LOCKED
position
DCV Locking Tabs
CAP Tabs
SPRAY-PRO
S15
NOZZLE
with
FLAT SIDES
align with
CAP Tabs
RUBBER
WASHER
EarthWay
R
Nozzle Installation
5
To remove turn Cap from right to left
5
Push Nozzle out of the Cap and remove rubber washer.
5
Install Nozzle aligning the flat sides with the Cap tabs and
reinstall rubber washer.
5
To install the assembly, align the Cap slot with DCV locking
tabs and push onto DCV and turn left to right to lock.
