OPERATING
For preparing seed beds, we recommend using one
of these tilling patterns:
Tilling Pattern A–
Make two passes over area to be
tilled, the second at a right angle to the first.
Before use, remove any visible stones or other
foreign bodies from the area.
CAUTION:
Before moving the tiller/cultivator from
one area to another switch off the motor and wait for
the tines to come to a complete stop. Be careful not
to let the tines touch the ground while moving the
tiller/cultivator. The tines as well as the unit itself
may be damaged even if the motor is switched off.
Tilling Pattern B–
Make two passes over area to be
tilled, the second overlapping the first.
Clearing foreign objects:
During operation a stone or root could become
lodged in the tines, or tall grass or weeds may
become wrapped around the tine shaft. To clear
the tines or tine shaft release the trigger lever,
wait for the tines to come to a complete stop and
unplug the tiller/cultivator. Dislodge or remove
the foreign matter from the tines or tine shaft.
To simplify removal of tall grass or weeds from
the tine shaft, remove one or more of the tines.
See Tine Removal and Installation.
7
Model TC70001
