If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your microphone is connected to an active power supply.
• Phantom power is being supplied to the microphone.
• Your microphone and XLR cable are well connected.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
SPECIFICATIONS
FW730
Frequency Response
20Hz - 30kHz
Polar Pattern
Cardioid or Hypercardioid
Sensitivity
10mV/Pa (-40dBV/Pa) (Cardioid); 20mV/Pa
(-34dBV/Pa) (Hypercardioid)
Power requirements
24-48V Phantom, 10mA
Peak acoustic input
145dB SPL (Cardioid); 139dB SPL
(Hypercardioid)
Output
XLR-3
Minimum output load
600Ω, balanced between pins 2 & 3
Noise
20dB SPL (Cardioid); 16dB SPL
(Hypercardioid)
Dimensions L x D
Stand 7 ft. 2 in.” long (1.32m), Cast Iron
Base 12” (30.48cm) in diameter, 1.1” (2.7cm)
high; Tripod Base 23” (0.58m) footprint, 6”
(15.2cm) high
Weight
Stand 2 lbs. (.9 kg), Cast Iron Base 12.6 lbs.
(5.7kg), Tripod Base 1.6 lbs. (0.73kg)
WARR ANT Y
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: returns@earthworksaudio.com.
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
WE'RE HERE TO
HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at sales@
earthworksaudio.com, or by phone at (603)-654-2433.
37 Wilton Rd. Milford, NH 03055
(603) 654-2433
sales@earthworksaudio.com
earthworksaudio.com
© 2020 Earthworks, Inc
