M23R
MEASUREMENT MICROPHONE
* Avoid extreme heat and condensing humidity.
Allow the microphone to warm up when bringing it
in from the cold.
* Rough handling may damage the microphone
even if no markings are visible.
* When not in use, keep the microphone in its case.
IMPORTANT NOTICES
The small tip on many of our microphones allows them
to capture the highest frequencies of your sound.
Please be gentle and considerate when handling the
microphones with these tips. (Microphones such as the
SR314 and SR40V shield the tip within their capsule,
and are thus more durable.)
The M23R meets or exceeds ANSI Type 1 requirements.
The microphone’s sensitivity at 1kHz is measured at the
factory.
Earthworks recommends re-calibration every five (5)
years.
TROUBLESHOOTING
If you encounter issues while using your Earthworks
Audio microphone, please make sure that
* Your microphone is connected to an active power
supply.
* Phantom power is being supplied to the
microphone.
* Your microphone and XLR cable are well
connected.
* The microphone is positioned at an appropriate
distance from the sound source.
* External noise in your recording environment is
kept to a minimum.
