If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your microphone is connected to an active power supply.
• Phantom power is being supplied to the microphone.
• Your microphone and XLR cable are well connected.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
SPECIFICATIONS
SR30
Frequency Response
20Hz - 20kHz
Polar Pattern
Cardioid
Sensitivity
20mV/Pa (-34dBV/Pa)
Power Requirements
24-48V Phantom, 10mA
Peak Acoustic Input
139dB SPL
Output
XLR-3
Output Impedance
65Ω, balanced between pins 2 & 3
Minimum Output Load
600Ω, balanced between pins 2 & 3
Noise
16dB SPL (A weighted)
Dimensions L x D
229 x 22 mm (9 x .860 in.)
Weight
225g (.5lb)
WARR ANT Y
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: service@earthworksaudio.com.
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
WE'RE HERE
TO HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at
info@earthworksaudio.com, or by phone at (603)-654-2433.
37 Wilton Rd. Milford, NH 03055
(603) 654-2433
info@earthworksaudio.com
earthworksaudio.com
© 2021 Earthworks, Inc
