) First unscrew the top half of the microphone (the
basket).
) Cleaning the External Stainless Screen - unscrew
the external stainless screen.
) Cleaning the Dual Stainless Pop Filter - both sides
can be cleaned, but most of the dirt will be on the
side facing the external screen.
) Internal Stainless Windscreen - it would be
extremely rare if the internal windscreen should
ever need cleaning, but it may be cleaned if the
need arises. As this windscreen is very close to the
microphone element, be extra careful that the
windscreen is dry before reassembly.
EXPANDED VIEW OF THE SR3314
Please note that with Shure Axient and Sennheiser
D6000 handheld transmitters, the SR3314 and the
SR5314 may take a little over 3 seconds to warm up,
starting from the moment the transmitter
is switched on. Since the Sennheiser SKM 6000 and
the Shure Axient AD2 and ADX2 wireless transmitters
power up and start passing audio quicker than this,
we recommend keeping the channel muted during
this short warmup period to prevent distortion and/or
noise being heard.
SR3314
Wireless vocal microphone
