SPECIFICATIONS
WARR ANT Y
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: returns@earthworksaudio.com.
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
37 Wilton Rd. Milford, NH 03055
(603) 654-2433
sales@earthworksaudio.com
earthworksaudio.com
© 2020 Earthworks, Inc
If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your microphone is connected to an active power supply.
• Phantom power is being supplied to the microphone.
• Your microphone and XLR cable are well connected.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
WE'RE HERE TO
HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at sales@
earthworksaudio.com, or by phone at (603)-654-2433.
SR3314
Frequency Response
20Hz – 30kHz
Polar Pattern
Cardioid
Sensitivity
6.5 mV/Pa (-43.7 dBV/Pa)
Power requirements
3V to 6V; 2.1 mA @ 5V
Peak acoustic input
133 dBSPL @ 6V
Output
Center & outer ring on 3-ring concentric
connector
Output Impedance
0.1Ω unbalanced (ring 1 & 2)
Noise
22dBA @ capsule output (A weighted)
Threads
1.25”/28 (31.7mm/0.9) thread pitch to
match compatible wireless handheld
transmitters
Dimensions L x D
Length: 3.3” (84mm)
Dia. max: 1.6” (40.6mm)
Dia. min: 1.46” (37mm)
Weight
0.4 lbs. (0.18 kg)
