Earthworks SR314, User Manual

SR 314

Basket

Internal 

Stainless 

Windscreen

Microphone

Body

2

3

Exploded View of the SR314

External Stainless Screen

Dual Stainless Pop Filter

Cleaning the SR314 

All cleaning should be done with either alcohol wipes, or with  

a small amount of alcohol on a soft cloth. Make sure any cleaned 

elements are completely dry before reassembling.
  a.  First unscrew the top half of the microphone (the basket)

    see “a” below.
  b.  Cleaning the External Stainless Screen - unscrew the  

    external stainless screen as shown in image “b” below. 
  c.  Cleaning the Dual Stainless Pop Filter -  both sides can be   

    cleaned, but most of the dirt will be on the side facing the   

    external screen (see “c” below).
  d.  Internal Stainless Windscreen - it would be extremely rare   

    if the internal windscreen should ever need cleaning, but it  

    may be cleaned if the need arises. As this windscreen is    

    very close to the microphone element, be extra careful that  

    the windscreen is dry before reassembly (see “d” below).

a. Basket

b. Clean external

   stainless screen

c. Clean dual 

  stainless pop  

  filter if necessary

d. Cleaning of the  

  internal stainless 

  windscreen should  

  not be necessary

  with normal use

Do Not attempt to 

disassemble the 

microphone section, 

as it cannot be 

opened