6. TROUBLESHOOTING
8
NOTE
Parts illustrated in this use and care manual are indicative only, parts provided with the
product may differ with illustrations.This product is intended for household use only.
Specifications are subject to change without notice.
Failures
Reasons
Treatment
The heating indicator
light is off.
Failures of the temperature
controller.
Contact with our tecnice
service EAS ELECTRIC
No water coming out
of the hot water outlet.
The water temperature
is too high.
Water leak.
1. The running water supply
is cut off.
2. The hydraulic pressure is
too low.
3. The inlet valve of running
water is not open.
1. Wait for restoration of
running water supply.
2. Use the heater again
when the hydraulic
pressure is increased.
3. Open the inlet valve of
running water.
Failures of the temperature
control system.
Seal problem of the joint of
each pipe.
Seal up the joints.
WARNING
Non-professionals are not allowed to disassemble the thermal switch to reset.
Please contact professionals to maintain. Otherwise our company will not take
responsibility if any quality accident happens because of this.
!
(Fig.6)
Manual reset button
NOTE:
If after making all checks, the problem persists, contact our technical service
throuhg our website:
www.easelectric.es
Contact with our tecnice service
EAS ELECTRIC
V.1
