2. Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan
and the
surface of the cooking zone are clean and
dry.
3.
Touching the heating zone selection
control ,and a indicator next to the key will flash.
4. Select a heat setting by touching the “-” or
“+” control.
•
you have not placed a pan on the correct cooking zone or,
•
the pan you’re using is not suitable for induction cooking or,
•
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.
The display will automatically turn off after 1 minute if no suitable
pan is placed on it.
•
•
If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at step
1.
You can modify the heat setting at any time
during cooking.
If the display flashes
This means that:
alternately with the heat setting
Warning:
The whole hob can take in charge a maximum power of 3000W.
Consequently, the hob automatically reduces the maximum output
power by allowing a maximum sum of the all power levels of 12
11
V.2
