Hook the hood body
Open the panel.
Remove the Metal grease filter using the handles provided.
(Either) Hook the hood body to the bracket 20.
(Or) Hook the hood body to the screws 10 (5 x 50) at the points (2).
Level the hood body itself.
Wrong
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe
ɸ
150 or
ɸ
120 mm, the choice of which is left to the installer.
If to install a
ɸ
120 mm air exhaust connection, insert the
reducer flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps
(not supplied).
Remove possible charcoal filters.
Right
Fix the brackets (Optional):
Drill at the marked points
(1) (2) (3)
, using a
ɸ
10 mm drill bit.
Insert the Wall Plugs 11 into the holes (1) (2) (3).
Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) supplied with the hood.
Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) supplied with the hood.
Repeat this operation on the other side and on the vertical reference line,
checking that the three marks are leveled.
Mark a point (3) on the horizontal line C,
80
mm to the vertical reference line.
Repeat this operation on the other side , checking that the two marks are
leveled.
8
V.6
Summary of Contents for EMRH608VRT-W
Page 6: ...unidad mm DIMENSIONES 600 900 418 490 110 6 1 5 3 4 5 400 450 750 500mm Min 500mm Min 6 V 6...
Page 20: ...unit mm DIMENSIONS 600 900 418 490 110 6 1 5 3 4 5 400 450 750 500mm Min 500mm Min 6 V 6...
Page 34: ...unit mm DIMENSIONS 600 900 418 490 110 6 1 5 3 4 5 400 450 750 500mm Min 500mm Min 6 V 6...
Page 48: ...unidade mm DIMENS ES 600 900 418 490 110 6 1 5 3 4 5 400 450 750 500mm Min 500mm Min 6 V 6...
