50
Después de unos segundos, todos los parámetros
establecidos en la interfaz de usuario se restaurarán a la
configuración de fábrica.
10.6.11 PRUEBA DE FUNCIONAMIENTO
TEST RUN se usa para comprobar el correcto
funcionamiento de las válvulas, purgado de aire, bomba
de circulación, refrigeración, calefacción y agua caliente
sanitaria.
MENU> FOR SERVICEMAN> 11.TEST RUN. Pulse OK
para acceder a la siguiente página:
10.6.10 RESTABLECER VALORES DE FÁBRICA
El ajuste RESTORE FACTORY SETTING se usa para
restablecer todos los parámetros a los valores de fábrica.
MENU> FOR SERVICEMAN> 10.RESTORE FACTORY
SETTINGS. Pulse OK para acceder a la siguiente página:
10 RESTORE FACTORY SETTINGS
All the settings will come back to
factory default.
Do you want to restore factory
settings?
OK
CONFIRM
NO
YES
11 TEST RUN
Active the settings and
active the “TEST RUN”?
OK
CONFIRM
NO
YES
Please wait…
5%
10 RESTORE FACTORY SETTINGS
Si se selecciona YES, se mostrarán las siguientes páginas:
Si selecciona POINT CHECK se muestran las
siguientes páginas:
Pulse ▼ ▲ para desplazarse a los componentes que
desea verificar y presione ON / OFF. Por ejemplo,
cuando se selecciona Válvula de 3 vías y se presiona
ON / OFF, si la válvula de 3 vías está abierta / cerrada,
entonces el funcionamiento de la válvula de 3 vías es
normal, al igual que otros componentes.
11 TEST RUN
Test run is on.
Air purge is on.
OK
CONFIRM
11 TEST RUN( POINT CHECK)
OFF
OFF
OFF
OFF
OFF
ON/OFF
ON/OFF
3-WAY VALVE 1
3-WAY VALVE 2
PUMP I
PUMP O
PUMP C
1/2
11 TEST RUN( POINT CHECK)
OFF
OFF
OFF
OFF
OFF
ON/OFF
ON/OFF
PUMPSOLAR
PUMPDHW
INNER BACKUP HEATER
TANK HEATER
3-WAY VALVE 3
2/2
Si selecciona AIR PURGE y pulsa OK, se muestra
la siguiente página:
Antes de la verificación del checkpoint, asegúrese
de que el tanque y el sistema de agua estén llenos
de agua y que se expulse aire, o puede causar
que la bomba o el calentador de respaldo
se quemen.
ATENCIÓN
OK
ENTER
11 TEST RUN
11.1 POINT CHECK
11.2 AIR PURGE
11.3 CIRCULATION PUMP RUNNING
11.4 COOL MODE RUNNING
11.5 HEAT MODE RUNNING
OK
ENTER
11 TEST RUN
11.6 DHW MODE RUNNING
Pulse
▼
para seleccionar YES o NO y pulse OK. Se muestra
▲
la siguiente página:
V.2
Summary of Contents for ETH220VMA
Page 164: ...V 2...