GPS tracking system
- 10 -
Device 5 working modes
1. Live Tracking Mode (1)
Command:
PS0
In this mode, Both GSM and GPS are on all the time, Battery can last 18~24 hours.
2. Smart Power Saving Mode (2) (default working mode)
Command:
PS1
In this mode, the gsm chip is working and receives calls, SMS and transmits location. The GPS chip is activated by motion, incoming calls and SMS. The GPS
chip is off when there is no movement or no phone usage. Battery life is not wasted when the device isn't moving.
Under normal use, battery can last 3 ~ 7 days.
3. Deep Sleeping Mode (3)
Command:
DS1 or DS1,xxM/H
Both GSM and GPS chip will be off to save power, the device is unable to receive calls or SMS.
It can be only activated by movement. Once movement is detected, it will run for the set time and sleep again if no movement is detected.
Battery can last 40 days if no movement at all.
To turn off this function, send
DS0
4, Working mode (4)
Command:
Mode4
In this working mode, device can always receive SMS, calls. But GPS chip only wakes up and updates location to the tracking platform if user press button or
receive phone call/text message.
Without press button or phone call/text message, GPS chip will always sleep.
5, Time interval working mode (5)
Command:
Mode5,xxS/M/H
Example: Mode5,10M
Device will update location to the tracking platform every 10 minutes.
In this working mode, device can always receive SMS, calls. And it updates location to the tracking platform according to the time you set.
Real time tracking on
Test Account
:Username:ET-Safe1 Password:123456
Our web based tracking system incorporates the TCP/IP protocol and allows users to monitor it in real time over the internet or sends an e-mail to the
