X
- 68 -
Shrinkage Calculation
2. Shrinkage Calculations
ES-12 provides a very easy-to-use shrinkage calculation function of which allow the operator to calculate
the expanded or reduced dimension very easily.
It is virtually not possible to have a mould drawing that have 100% completed and corrected expanded
or reduced dimensions. The shrinkage calculation function is a very convenience function to be used
in the situation that there are some missed calculations in the mould drawings, It allows operator to
re-calculate the expanded or reduced dimension in a very very simple way. It also provides an easy
method for the operator to verify the calculated dimensions that marked in the drawings.
Shrinkage calculation KEYs :
for expand calculation
for reduce calculation
Example :
To calculate the expaned dimension of
current X axis displayed dimension
27mm expanded = 27 / 1.005 = 26.886
calculated result will be displayed in the
message window
27mm expanded = 27 X 1.005 = 27.135
calculated result will be displayed in the
message window
Example :
To calculate the expaned dimension of 27mm
Example :
To calculate the reduced dimension of 27mm
The current position of X axis is 123.450,therefore,
123.450 expands = 123.24 X 1.005 = 124.067.
calculated result will be displayed in the
message window
X
Y
Z
ABS
mm
mm
mm
123.450
22.500
120.345
X
Y
Z
ABS
mm
mm
mm
123.450
22.500
120.345
X
Y
Z
ABS
mm
mm
mm
123.450
22.500
120.345
X
Y
Z
ABS
* 27.135
mm
mm
mm
123.450
22.500
120.345
X
Y
Z
ABS
* 26.886
mm
mm
mm
123.450
22.500
120.345
X
Y
Z
ABS
* 124.067
mm
mm
mm
123.450
22.500
120.345
Summary of Contents for ES-12
