X
Y
Z
ABS
X=0 ANG-20.00
0.000
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS
X=0 ANG-20.00
85.000
0.000
0.000
Z
X
INCL.
Conical angle ( INCL ANG )
= -20 degree ( counter clockwise )
enter incline angle (
INCL ANG
)
press to enter into the INCL machining
function cycle
all the machining parameters
already entered into the INCL
function,
Step 3
: enter the incline angle (
INCL ANG
)
The DRO is now entered into the INCL machining function cycle
-20
0
- A. 10 -
0
Step 4
: ZERO the dial indicator at one end of the work piece, and also ZERO the DRO by pressing
zero the Y axis
to redatum the
Y axis
XY
plane
INCL
machining
mode display
X display is shifted left to
remind the operator that
the axis display zero
position is preset to
=
Y
* TAN(
ANG
)
operator simply move the
machine to X = 0.000,
then the tool is accurately
located at the inclined
axis.
Y
0
Y
0
0.05mm
since the X axis zero position will follow the Z axis position
at the incline angle of ANG ( -20 degree in this example )
operator just move the X axis display to = 0.000, it is then
at a highly accurate -20 degree inclined to the Z axis.
Just mark down the reading in the dial indicator, it is the
inclined angle error
.
The dial indicator shows -0.05mm
at Z axis display = 85.000mm,
when X axis is moved to X = 0.000mm.
Then the
inclined angle error is -0.05mm
Z moved by 85.0mm
ZERO the dial
Indicator
dial reading = -0.05mm
INCL
function - cone measurement
X
Y
Z
ABS
INCL. ANG
0.000
INCL. ANG
Z
X
INCL.
X
Y
Z
ABS
INCL. ANG
-20.000
INCL. ANG
Z
X
INCL.
Summary of Contents for ES-12
