Thank you for your purchase.
Our Customer Support team are available 8am-5pm on (07) 5476 9227 if you have any further questions.
TO DELETE A STORED USER PIN:
1. Press the FCN button followed by your PRIMARY PIN then press FCN button again
2.
Select ‘2’ button followed by FCN button
3. Select the Memory (MEM) number of the USER PIN and then press FCN button
4. Repeat Step 3 to confirm
5. The Keypad will beep and flash to indicate it is exiting LEARN mode
6. Test entering the USER PIN code followed by the CHANNEL button to operate the door/gate. The door/gate
should NOT respond if the PIN has been deleted.
TO CLEAR THE MEMORY and RELOAD FACTORY SETTINGS:
1. Press the FCN button followed by your PRIMARY PIN then press FCN button again
2.
Select ‘0’ button followed by FCN button
3.
Enter in ‘0000’ followed by FCN button
4. Repeat Step 3 to confirm
5. All memory is now cleared from the KPX7 (however the receivers will continue to respond to the KPX7 Channels)
Figure 1:
