Thank you for your purchase.
Our Customer Support team are available 8am-5pm on (07) 5476 9227 if you have any further questions.
C945 (BEAR CLAW), C940 & C945 & E945M HANDSETS (433MHz) (diagram 3 overleaf): TO CODE YOUR NEW
REMOTE USING THE MOTOR PANEL:
1.
Identify the ‘LEARN’ button located on the CONTROL PANEL of the MOTOR (refer diagram 3 overleaf)
2. Press and HOLD the desired remote push button that you wish to open the door.
3. Press
and RELEASE the ‘LEARN’ button on the control panel. The MOTOR light or courtesy LEDs will flash
once.
4. Release the remote push button.
NOTE: IF YOU RELEASE THE REMOTE PUSH BUTTON BEFORE THE MOTOR LIGHT OR LEDs FLASH,
THE MOTOR HAS NOT ACCEPTED THE CODE.
To delete all remote controls from the openers memory: press and hold the ‘LEARN’ button on the control panel until
the courtesy lights/leds turn off (about 6
– 10 seconds).
DIAGRAM 1
DIAGRAM 2
DIAGRAM 3
MT5580
MT600
MT60
MR800/a
MR600a
