MGI Zip X3
User Manual
11
10
4.0 Battery Charging & Connection
The Zip X3 is designed to take either Zip battery:
• MGI 24v 250Wh Lithium battery [Standard]
• MGI 24v 380Wh Lithium battery [Optional]
4.1 Initial Charge
• Before using your MGI Zip X3 for the first time you must fully
charge the battery overnight.
• Plug the charger AC lead into a power point - the Green LED
illuminates to indicate the charger is power on.
• Plug the charger output connection into the connector
on the front of the battery - the Red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready to be used.
Please refer to the battery charger user manual for further
information.
4.2 Connecting the Battery onto the Zip X3
Position the battery on the Zip X3 and push the battery down to
secure it.
Push the handle down to connect the battery to the Zip X3.
Your Zip X3 has been equipped with fail safe battery connection,
so the Zip X3 will not move when you connect the battery. Your Zip
X3 will only start once the speed control is switched on.
4.3 Charging the Battery after Use
• Disconnect the battery by lifting the handle.
• The battery can be left on or removed from the Zip X3 for
charging.
• Plug the charger AC lead into a power point - the Green LED
illuminates to indicate the charger is power on.
• Plug the charger output connection into the connector
on the front of the battery - the Red LED illuminates to indicate
charging.
• When the charging LED indicator has turned green, the
battery is fully charged and ready to be used.
5.0 Fitting the Golf Bag
Ensure that the top bag support straps are disconnected.
Position the golf bag on the Zip X3.
Secure the top bag support strap
• Select a good position for the elasticised straps to be put
around the golf bag
• Stretch the longer end of the strap and loop the rounded
plastic bar underneath the hook on the shorter end
• The top bag support straps should now be connected.
Please ensure the top bag support straps are hooked in place
securely before releasing. Failure to do so could result in injury to
the user.
Adjusting the length of the top bag support strap
The rounded plastic bar on the longer strap can be adjusted to
ensure the bag is secured properly in place.
Secure the lower bag strap
Pull the lower bag strap over the base of the golf bag
Summary of Contents for MGI zip Series
Page 2: ......
