MGI Zip X3
User Manual
19
18
9.2 Warranty Exclusions
The following events will void warranty:
• Any alteration performed by non-authorised people or
companies.
• Fitting of parts or accessories not recommended by MGI.
• Any damage caused by continued operation of the product
after it is known to be defective.
• Damage to the seat and/or seat support bracket on the unit.
• Damage caused by partial or complete ingress of water into
motor/gearbox and other major components.
• Damage caused by the unit being driven into bunkers, other
course hazards or clubhouse and carpark hazards.
• Damage caused by golf balls or golf clubs.
• Application of external force to any part of the unit or battery.
• Fusion of motor or electronics through overload or continual
stationary operation.
• All implied warranties [save those preserved by statute] are
excluded.
• Liability for consequential damages under any and all
warranties are excluded to the extent exclusion is permitted
by law.
In the event of submersion in water (partial or full) of your Zip X3;
MGI advises the complete write-off of your Zip X3.
The cost of replacing the water-damaged components (including
labour) exceeds the price of a replacement Zip X3.
If you elect to purchase replacement components, i.e. motors,
gearbox, motor controller and electronics, we advise the
replacement of ALL components simultaneously. Replacing
individual components on a water-damaged Zip X3 poses a
higher risk of future failure of other components and therefore
these parts will not be covered under warranty.
Please note that MGI does not warrant water-damaged batteries
and, due to fire risk, under no circumstances should they continue
to be used.
The following events are not covered under warranty:
Normal wear and tear;
- (e.g. tyres, rubber handlebar, elastic straps, paintwork, battery
performance, axles threads, charging ports on batteries and
remotes, screen glass etc.)
- Minor appearance defects which bear no effect on the
operation of the unit and are considered by the manufacturer to
be within the accepted standards.
9.3 Parts Installed During Warranty
Warranty coverage for components installed during a motorised
Zip X3’s warranty period shall consist of the duration of the Zip X3’s
warranty period, provided the warranty installation is performed
by MGI, an authorised service centre or the Zip X3 owner on
approval. Replacement of parts under warranty will not extend
the warranty of the Zip X3 or parts.
10.0 Preventative Maintenance Program
To properly provide for the continued operation of your MGI Zip X3,
MGI has introduced its Preventative Maintenance Program [PMP].
The PMP consists of work to be carried out by both the owner and
authorised service centres. To properly maintain the warranty of
your MGI Zip X3, it is essential that this work is carried out. If the
work carried out by the authorised service centre is to replace
parts that are part of the maintenance schedule, the owner will
be charged for the parts and labour. If the work to be carried out
is part of warranty, MGI will bear the cost.
10.1 Cleaning Your Zip X3 [See Maintenance Schedule]
• For years of good operation, your Zip X3 requires care and
attention.
• Keep your Zip X3 clean by using a cloth with warm water and
a mild detergent.
• Do not hose down your Zip X3 under any circumstance, as
the Zip X3 has electronic components.
• Ensure that the seat stem bracket is free from sand.
• Do not submerge your Zip X3 in water as it will cause
irreparable damage.
• Clean the Zip X3 battery base when the battery is removed
from the Zip X3.
10.2 Rear Wheel Axles Maintenance [See Maintenance
Schedule]
The rear wheel stub axles need to be lubricated regularly. Remove
the rear wheels by depressing the spring clip and at the same
time pull off the wheel. Apply Petroleum Jelly or light grease to the
stub axles. Use a very small amount as the grease can attract
sand. If you play in sandy conditions you should clean the axle
and regrease fortnightly.
Summary of Contents for MGI zip Series
Page 2: ......
