background image

 

MGI Zip X3 

User Manual

 

21

20

10.3 Upper and Lower Bag Strap Maintenance [See 

Maintenance Schedule]

The bag straps should be replaced as per the Service Schedule. 

The upper bag strap can be replaced by:
•  Removing the left and right hand straps form the upper bag  

support

•  Undo and remove the screws holding the strap in position  

on the bag support

•  Remove and replace both bag straps
•  Insert bag strap securing screws.

10.4 MGI Service Schedule

It is the owner’s responsibility to ensure that all periodical checks, 

necessary adjustments and services are carried out. If in doubt 

please contact the MGI service centre:

Australia 

1300 644 523

USA 

1800 617 2990

Any work performed on your Zip X3 should be recorded on your 

service record (see page 21) regardless of the work.

MGI Zip X3

Monthly

6  

Monthly

Every  

2 yrs

Every  

3 yrs

Wipe down the Zip 

X3 with a warm cloth 

after each use [do 

not hose]

BO

Lubricate rear wheel 

stub axles

BO

Check and tighten 

nuts and bolts

BO

Check and tighten 

handle pivots

BO

Check alignment of 

Zip X3 – ensure that it 

runs straight

BO

Replace Speed 

Controller and On/

Off switch assembly

BO /SC

Replace rear and 

front wheels 

BO

Replace upper and 

lower bag straps

BO

BO = Zip X3 owner can carry out this work

SC = Charged work to be carried by approved service centre

BO/SC = The six monthly service can be completed by either an 

authorised service centre or the owner of the Zip X3.

10.5 Service Record

6 month  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

1 year inspection

Date: 

Invoice #:

Serviced by: 

Signature:

1 ½ year  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

2 year  

inspection

Date:

Invoice #:

Serviced by: 

Signature:

2 ½ year  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

3 year inspection

Date: 

Invoice #:

Serviced by: 

Signature:

3 ½ year  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

4 year inspection

Date: 

Invoice #:

Serviced by: 

Signature:

4 ½ year  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

5 year inspection

Date: 

Invoice #:

Serviced by: 

Signature:

5 ½ year  

inspection

Date: 

Invoice #:

Serviced by: 

Signature:

6 year inspection

Date: 

Invoice #:

Serviced by: 

Signature:

Summary of Contents for MGI zip Series

























Reviews:

Related manuals for MGI zip Series