T-Nut x 2
Metal Washer x 2
Hexagon Key x 2
Upright (2)
End (2)
Foot (2)
Woodscrew x 2
Base (1)
Crossbar (1)
Side (2)
Barrel Nut x 12
Metal Tube x 2
Short Bolt x 4
(30mm)
Wooden Spacer x 2
Lock Mechanism x1
Lock Handle x 1
Medium Bolt x 12
(60mm)
Long Bolt x 2
(65mm)
IMPORTANT. RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation
of this product.
This
crib
should
be
assembled
by
an
adult,
preferably
with
the
help
of
an
assistant.
Please
note
that
a
cross-headed and a flat bladed screwdriver will be required to complete the assembly
of this product.
All
fittings
should
always
be
fully
tightened.
Take
care
that
no
fittings
are
loose,
because
a
child
could
trap
parts
of
the
body
or
clothing
(e.g.
strings,
necklaces,
ribbons
for
soothers
etc),
which
would
pose
a
risk
of strangulation.
Lay out the parts on a soft level surface and compare to the part/fixing checklist below. Do not discard
any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a choking hazard.
You will need the following tools to complete assembly:
Flat-headed screwdriver. Cross-headed screwdriver.
Hardware
2
