Page 3
Before assembling the cot, note the Sides and Base are secured using different
length bolts. DO NOT use the Long bolts to secure a Side to an End panel.
The Barrel nuts are slotted at one end to allow them to be rotated with a
screwdriver to align with the bolts. Hence please ensure the slots are visible when
4
Cot assembly
Attach an End panel to the side, using x2 Short bolts.
Ensure that the plastic teething rail on the sides are at the top.
Do not fully tighten the bolts at this stage.
Side
End panel
Short bolt
Long bolt
Barrel nut
x2
fitting the Barrel nuts.
