ZIP WATER PURIFIER USER GUIDE
HOW TO REPLACE THE RO MEMBRANE
1.
Remove the back cover
2.
Remove the post filter from the post filter retaining clips (fig 2) and remove the retaining clips
from the
RO cartridge
3.
Pull the RO membrane cartridge to remove it from the RO cartridge retaining clips
4.
To remove the elbows from the RO cartridge, push the collet sleeves into the elbow connector
5.
While holding the collet sleeves in, pull the elbow off the top of the RO cartridge
6
In the same way, remove the two elbows from the bottom of the RO cartridge
7
Remove the new RO cartridge from its packaging and remove the protection caps from the top and
bottom of the cartridge (fig 7)
8
Replace the elbow connectors to their corresponding spikes on the RO cartridge (fig 8)
9
Replace the membrane cartridge back into the retaining clips (fig 9)
Page 14
