15
EASTOAK.COM
PYRAMID PATIO HEATER
6
5
Carefully insert the glass tube through the center opening of the top plate.
Make sure to lift the top plate up first. The black silicone ring (F) should
be attached to the lower edge of the glass tube (C) as illustrated below.
Slide the glass tube © through the opening of the lower plate and onto the
middle plate (J). Make sure the glass tube (C) is positioned in the center
and completely covers the center hole of the middle plate (J).
WARNING! DO NOT use the heater UNLESS the black silicone ring is
placed on the bottom of the glass tube.
Assemble the protective guard (E) by hanging its
hooks onto the supports. Secure the guards with
fixing brackets (GG) and 4 3/16” screws (HH).
To aid in installation place black
silicone ring on the middle plate and
then install glass tube. Ensure the
rim of the glass tube sits firmly in the
black silicone ring.
BLACK SILICONE
RING
HH
GG
E
GG (X4)
HH (X4)
