18
SUPPORT@EASTOAK.COM
1-833-327-8625
OPERATION
•
Before every leak test, ensure that there are no combustible or flammable
materials, such as gas, liquids, or vapor. Ensure there are no items that can
catch on fire; this may include loose clothes, hair, etc.
•
Attach the propane gas tank to the regulator. Turn the valve knob to
the “OFF” position. Brush or apply a mild soap and water solution to all
connections. Turn the gas supply on.
•
If bubbles are present on any of the connection, there may be a leak and
you must turn off your gas valve immediately. If you smell any gas, turn of
your gas valve immediately. Disconnect the gas tank and do not use the
appliance until the leak is repaired or parts are replaced.
•
NEVER use the heater without inspecting the gas hose first.
•
If any signs of wear or abrasion occur, the hose must be replaced
immediately and before the next use.
NOTE: The central spigot is designed
with a reverse angle to ensure the
canopy sits level once assembled. It
is very important to correctly locate
the crank winder directly above the
tension screws as shown.
