9
EASTOAK.COM
1500W TOWER ELECTRIC HEATER
5
If the glass baffle needs to be installed, reverse steps 4a - 4c.
Do not move or cover the appliance when it is in use.
GROUNDING INSTRUCTIONS
This heater is compatible with 120 volt sockets. The plug (A) is shown
Figure 60.1. An adapter (C) is available to adapt three-blade plugs to
two-slot sockets. The green grounding extension must be connected to
a permanent round, such as an outlet box. The adapter should not be
used if a three-slot socket is available.
•
Inspect the mount and all mounting
pieces, such as dowels and screws.
Make sure they are secured tightly to
lengthen the product’s lifespan.
•
Do not add excessive weight to the
appliance.
•
Adjust your heater to your desired
angle. Then, fasten all screws tightly.
Regularly check your screws and
tighten if needed.
•
Plug your heater to a power source,
then turn the switch to the “ON”
position. Assess the product for at
least 15 minutes to ensure there are
no problems.
